How to find Admin Configuration Password of your router TEWA-300AI

HomeForumsGeneral DiscussionHow to find Admin Configuration Password of your router TEWA-300AI

Viewing 7 posts - 1 through 7 (of 7 total)
  • Federico
    Federico
    Participant

    Translated and tried:

    1 – logon in your router 192.168.1.1 using “useradmin” like username and your password that you can find back of your router.
    2 – download and save your config file using this address in your browser http://192.168.1.1/backupsettings.conf
    3 – open saved file with notepad and find out your telecom admin username with 8 digits like password. Example: <X_CT-COM_TeleComAccount><Password>0D7b1446</Password>.
    4 – logon in your router 192.168.1.1 using “telecomadmin” like username and the admin password that you found out.

    电信的光纤猫TEWA-300AI配置密码如果没有超管密码,查找超级管理员密码方法:

    1 – 用光猫背后的useradmin 帐号和密码登录 192.168.1.1
    2 – 然后下载http://192.168.1.1/backupsettings.conf
    3 – 用记事本打开,找到telecomadmin+8位数,这个就是你光猫telecomadmin的密码。
    4 – 打开 http://192.168.1.1/ 页面,用超级管理员用户名telecomadmin和查找到的 密码登陆。

    #42730
    Charlie
    Charlie
    Keymaster

    What… ?

    #42731
    Federico
    Federico
    Participant

    Maybe a little introduction was better… usually China Telecom router can to be configured by a default user with few options available. By this topic you can find out admin user and password for your TEWA-300AI (common router if you are a China Telecom customer) for setup every option.

    http://g.hiphotos.baidu.com/zhidao/wh%3D600%2C800/sign=ef82516b324e251fe2a2ecfe97b6e52f/caef76094b36acaf806b65ad7ed98d1000e99cdc.jpg

    #42732
    aztronaut
    aztronaut
    Participant

    Hi Federico,

    i found your very old entry here, but downloading the config file didn’t work anymore. any chance there is an update on how to get all the relevant infos from the router so that i can use my own router?

    Cheers!

    #53928
    Ben
    Ben
    Moderator

    China Telecom can remotely configure the supplied modem/router. Just tell them that you want to use your own. They will reconfigure it FOC to bridge mode – or at least they did a few years back when I asked.

    #53929
    aztronaut
    aztronaut
    Participant

    Thanks Ben, will try that!

    #53930
    Federico
    Federico
    Participant

    Hi Ben, I’m still using this procedure and works for me, probably there is a difference in terms of model or firmware. Feel free to contact me also in private!

    #53937
Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.